Updating bios insufficient memory
Updating bios insufficient memory - dating fatties
/CD - stands for clearing DMI Data pool after reprogramming.Literally, DMI is a data base, containing all the information on the system as a whole.
Its main task is to load and execute the operating system which is usually stored on the computer's hard disk, but may be loaded from CD-ROM or floppy disk at install time. " * Boot block : Most flash BIOS's incorporate something called a 'boot block' and UNIFLASH will not normally overwrite it so it remains intact.A backup copy will help you to restore the previous version of the BIOS. /Sy or /Sn - stands for answering "yes" (Y) or "no" (N) to the request about saving the previous version of the BIOS. In this case before reprogramming the Flash ROM microchip you'll need to confirm saving by this request: Do You Want To Save BIOS (Y/N) /Sn is recommended to use for *.bat-files in case of automatic BIOS reflashing in systems without a display. This option comes in handy when there is a risk that the data arrays created by new BIOS version in CMOS may differ from those former ones.If so, then you are likely to have troubles with the mainboard startup.If protection is set, either you won't be able to reflash the BIOS without /SB at all or the system will face verification errors. It will make the data from the BIOS file loaded and reflashed in portions./E - stands for returning to DOS after BIOS reflashing.Thought it could be useful to list the known switches and what they stand for. BIN /py/sn/cc Would run the flashing utility and tell the utility to perform the flash (/py), do not save the current BIOS into a backup file (/sn), and clear the CMOS after performing the flash (/cc). /Py or /Pn - stands for answering "yes" (Y) or "no" (N) to the request concerning the BIOS reflashing.
Before you start working with Award Flash Memory Writer, it is advisable to use this key and to study carefully all the opportunities of this software.
For instance, you may need it to make sure that the previous version of the BIOS is saved.
/F - stands for reprogramming by means of the system BIOS.
/CC = clear cmos data after programming /CD = clear dmi data after programming /CP = clear Pn P (ESCD) data after programming /R= reset system after programming /PY = program flash memory /?
= show help menu /SY = backup original BIOS to disk /SB = skip bootblock programming /TINY = occupy lesser memory /E = return to DOS when programming is done /F = use flash routines in original BIOS for flash programming /LD = destroy cmos checksum and no system halt for first reboot after programming /CKSxxxx = compare binfile checksum with xxxx /CKS = show update binfile checksum /PN = no flash programming /SN = no original BIOS backup /SD = save dmi data to file /WB = flashes the BIOS Boot Block I recommend creating a DOS boot disk: 2,399.45Mhz @1.9vcore @3.3vdimm @1.9vdd, slk900a Smart fan II 2800rpm, Swiftech MCX159a, Maxtor Diamond Max Plus 9 60Gb, Club3D 9600 Pro 128MB, Asus E616, Teac 540E, Nec 2500a, Antec True Power 480, Antec Plus View 1000AMG - 5 fans.
/CKSxxxx - stands for comparing the checksum of the file with XXXXh.