Nikon d2x updating firmware
Nikon d2x updating firmware - Cam chat girl
Underneath the display of your camera's current firmware version, you should find a "Version Up" option.If you don't see it, check that your card is prepared correctly as described in the previous paragraph.
If you want to use a single card, just format the card after each so you start with a clean card.
First though, if you have a D2x and haven't updated your firmware yet, now is the time to do so. Don't let the modest increase in version number tempt you into not upgrading. Make sure your battery is charged or your camera is plugged in with the EH-6 AC adapter.
If you are unsure what you have right now, scroll down to the Firmware Version option at the bottom of the camera's Setup menu. Then drop by Nikon's website to download the update. Mac users that prefer Stuff-it can download D2xfw101instead.
Turn the camera off and remove the compact flash card. When finished with both, check the firmware version again to make sure both A and B banks show 1.01.
If all looks good, re-format the card(s) you used and you're done.
I had been unaware of these issues previous to the release of the new firmware, but have read reports on the web from users who say their flash problems were indeed fixed with this update.
Some users have also reported a decrease in noise at high ISO settings.
Firmware v2.00 for the Nikon D2X, available in separate downloads for Windows and Mac: Up to 3 custom tone curves can now be downloaded to the camera for use with the Custom option in the shooting menu’s Tone compensation item. 4.4.2) Camera Control is required to download 3 custom tone curves to the camera.
For the D2x and D2Hs, the changes are much more extensive.
If you put both files on the card at the same time, it won't work either. Using two cards meant that I could prepare both cards before embarking on the actual update process, but this is not a requirement.
Once you have the card with the "A firmware" bin file on it in the camera, go to the Firmware Update option on the Setup menu.
This thing reliably locks right onto both stationary and moving subjects, even in reasonably dim lighting.